Search Results
180
Products for "hus3"
Filter
- Description
- SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
New
- Description
- Chuck for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Click chuck
- Description
- Chuck for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Quick-release chuck
- Additional accessory information
- Drilling in wood or metal
- Description
- Overvoltage protector for wall and wire saws
No technical data available
- Description
- Accessories for the RT 6-A22 cordless rivet tool
No technical data available
- Description
- Stop drill bit (HMU)
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Post-installed hoist point for temporary suspensions during installation and maintenance in elevator shafts
- Material, corrosion
- Cast-iron, Multilayer coating
- Head configuration
- n/a
- Base materials
- Concrete (cracked), Concrete (uncracked)
- Description
- S-HP02SS Self-tapping screw for hidden-panel fastenings in light-ventilated facade applications
- Screw drive/recess type
- TX 25 HF
- Base materials
- High pressure Laminate
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Coastal areas
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for electrical connections on steel in highly corrosive environments – recommended maximal cross-section of connected cable: 120 mm² / AWG 4.0
- Material
- n/a
- Product class
- Ultimate
- Description
- Customised screwdriver bits for Hilti screw fastening systems
- Feature
- Torsion bits, Impact bits
- Connection end
- Hexagonal
- Description
- Flange nut for HSU-R stone undercut anchor
No technical data available
- Description
- Threaded rod (metre) for injectable hybrid/epoxy anchoring in concrete and masonry (5.8 or 8.8 carbon steel and HDG or A4 stainless steel)
- Material, corrosion
- Carbon steel 5.8, Carbon steel 5.8 HDG, Carbon steel 8.8, Carbon Steel, Hot-Dip Galvanised, Stainless steel, A4
- PROFIS software
- Yes
- Application
- Baseplate
- Description
- Bracket
- Material composition
- EN AW-6063 T66
- Insulation material
- Polypropylene
- Thickness insulation material
- 5 mm
- Description
- Galvanised pipe clamp saddle for connecting threaded components to MQ/HS channels
- Product class
- Premium
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Setting tool for internally threaded sleeves
No technical data available
- Description
- High-performance undercut anchor for cracked concrete (hot-dip galvanised)
- Material, corrosion
- Carbon steel, HDG (hot-dip galvanised)/sherardised
- Head configuration
- Externally threaded
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- Economical hook/ring anchor for suspended fastenings in concrete
- Head configuration
- Closed eye bolt, Open eye bolt
- Environmental conditions
- Indoor, dry conditions
- Approvals / test reports
- N/A
- Description
- Economical plastic impact anchor with carbon steel screw
- Head configuration
- Flat head
- Environmental conditions
- Dry indoor
- Approvals / test reports
- N/A
- Description
- Ultimate-performance anchor rod for adhesive capsules in cracked concrete (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked)
- Description
- Ultimate-performance anchor rod for adhesive capsules in cracked concrete (A4 stainless steel)
- Material, corrosion
- Stainless steel, A4
- Environmental conditions
- Costal areas / Roads with de-icing salt, Outdoor (more than 1km to coast), Outdoor with heavy industrial pollution
- Base materials
- Concrete (cracked), Concrete (non-cracked)
- Description
- High-performance anchor rod for capsule and injectable hybrid/epoxy anchoring in concrete and masonry (5.8 or 8.8 carbon steel and HDG or A4 stainless steel)
- Material, corrosion
- Carbon steel 5.8, Carbon steel 5.8 HDG, Carbon steel 8.8, Carbon Steel, Hot-Dip Galvanised, Stainless steel, A4
- PROFIS software
- Yes
- Application
- Baseplate
- Description
- Pre-assembled plastic anchor for concrete and masonry with highly corrosion-resistant screw (A4 stainless steel, hex head)
- Base materials
- Concrete (aerated), Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (grout-filled CMU), Masonry (hollow), Masonry (solid)
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire
- Description
- Economical plastic impact anchor with corrosion-resistant A2 stainless steel screw for outdoor use
- Head configuration
- Flat head
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor (more than 1km to coast)
- Approvals / test reports
- N/A
- Description
- High-performance internally threaded insert for capsule and injectable hybrid/epoxy anchors (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked)
- Description
- High-performance internally threaded insert for capsule and injectable hybrid/epoxy anchors (A4 stainless steel)
- Material, corrosion
- Stainless steel, A4
- Environmental conditions
- Costal areas / Roads with de-icing salt, Outdoor (more than 1km to coast), Outdoor (more than 1km to coast), Outdoor with heavy industrial pollution
- Base materials
- Concrete (cracked), Concrete (non-cracked)
premium
- Description
- Premium floor saw blade (5-18 HP) for floor sawing machines – designed for cutting concrete
- Tool type
- Floor saw
- Base material
- Concrete (non-reinforced), Concrete (reinforced), Concrete (heavily reinforced)
- Arbor size
- 25.4 mm
- Description
- High carbon steel (HCS) scraper blade attachment for the oscillating multitool, for scraping paint or glue
No technical data available
- Description
- High-performance plastic anchor for frames (A2 stainless steel, hex head)
- Base materials
- Concrete (aerated), Concrete (cracked), Masonry (grout-filled CMU), Masonry (hollow), Masonry (solid)
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire
- Description
- Torx drive screw for light-duty fastenings (carbon steel, pan head)
- Base materials
- n/a
- Head configuration
- Round head
- Material, corrosion
- Carbon steel, zinc-plated
ultimate
- Description
- Threaded screw-in stud (Stainless Steel, Metric or Whitworth thread) for electrical connections on steel in highly corrosive environments
- Material
- Duplex stainless steel (1.4462)
- Product class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (multilayer coated carbon steel – corrosion protection comparable to HDG) for grating and multi-purpose fastenings on steel in mildly corrosive environments. Compatible with Hilti MT installation channels
- Material
- Carbon steel
- Thread size
- M8
- Product class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (Stainless Steel) for grating fastenings on steel in highly corrosive environments
- Thread size
- M8
- Product class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (multilayer coated carbon steel – corrosion protection comparable to HDG) for multi-purpose fastenings on steel in mildly corrosive environments
- Product class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (Stainless Steel) for multi-purpose fastenings on steel in highly corrosive environments
- Material
- Duplex stainless steel (1.4462)
- Product class
- Ultimate
- Description
- Façade clamp for natural stone
- Material, corrosion
- Stainless steel, A4, Stainless steel, A2
- Head configuration
- n/a
- PROFIS software
- No
- Description
- Hanger rail for the concealed attachment of façade panels using hangers
- Height
- 63.5 mm
- Width
- 22.5 mm
- Length
- 6000 mm
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for grating fastenings on aluminium in highly corrosive environments
- Material
- Duplex stainless steel (1.4462)
- Thread size
- M8
- Product class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for multi-purpose fastenings on aluminium in highly corrosive environments
- Material
- Duplex stainless steel (1.4462)
- Product class
- Ultimate
- Description
- Inspection gauge for checking HSU-R stone undercut anchor drill hole geometry
No technical data available
- Description
- Inspection gauge for checking HSU-R stone undercut anchor drill hole geometry
No technical data available
New
ultimate
- Description
- Pointed chisel bits with polygon shank for faster demolition of concrete and masonry using the third-gen TE 3000 or H28 demolition tools with clamp
- Connection end
- TE-H (Hilti HEX 28)
- Product class
- Ultimate
New
standard
- Description
- Pointed chisel bits for chipping/breaking up concrete and masonry using the third-gen TE 3000 or H28 demolition tools with clamp
- Connection end
- TE-H (Hilti HEX 28)
- Product class
- Standard
ultimate
- Description
- Self-sharpening flat chisel bits for precision demolition of concrete and masonry using the third-gen TE 3000 or H28 demolition tools with clamp
- Connection end
- TE-H (Hilti HEX 28)
- Product class
- Ultimate
standard
- Description
- Ultra-robust flat chisel bits for chipping/channelling into concrete and masonry using the third-gen TE 3000 or H28 demolition tools with clamp
- Connection end
- TE-H (Hilti HEX 28)
- Width
- 38 mm
- Product class
- Standard
New
standard
- Description
- Scaling chisels for scraping away weld spatter, formwork seepage and other residues using the third-gen TE 3000 or H28 demolition tools with clamp
- Connection end
- TE-H (Hilti HEX 28)
- Application
- Scaling, Channeling
- Product class
- Standard
New
ultimate
- Description
- Ultimate core bit for coring in very abrasive concrete – for use with the DD EC-1 and DD 30-W (incl. Hilti C+ quick-release connection end)
- For use with
- DD 30-W
- Base materials
- Concrete (abrasive)
- Drilling mode
- Hand-held, Rig-mounted
New
ultimate
- Description
- Ultimate diamond wire designed for high speed and long life in all types of concrete and cast iron (15-30 kW wire saw)
- Base material
- Concrete, Concrete (reinforced)
- Segment type
- Sintered
- Wet or dry operation
- Wet and dry
New
premium
- Description
- Premium diamond wire designed for balanced speed and lifetime in all types of concrete and cast iron (15-30 kW wire saw)
- Base material
- Concrete, Concrete (reinforced)
- Segment type
- Sintered
- Wet or dry operation
- Wet and dry
- Description
- Premium diamond wire for pure steel cutting (15-30 kW wire saw)
- Base material
- Steel
- Segment type
- Electroplated
- Wet or dry operation
- Wet and dry
- Description
- Galvanised pipe clamp with sound insulation and quick closure for high productivity in light-duty applications
- Approvals
- ETA
- Noise reduction
- 17 dB (A)
- Temperature resistance
- -40 - 110 °C
- Description
- Plunge cut blade attachments for the oscillating multitool, available in HCS, BiM and carbide blades for plunge cuts in wood, hardwood or metal
No technical data available
- Description
- Grating disc for use with threaded studs in highly corrosive environments
- Application
- Grating
- Approvals
- ABS, BV, DNV GL, LR
- For use with (tools)
- DX 460, DX 5, DX 6
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
No technical data available
- Description
- Wire guide accessories for the DS WS15, DS WSS30 and DS WS10 wire saws
No technical data available
- Description
- Wire guide accessories for the DS WS15, DS WSS30 and DS WS10 wire saws
No technical data available
- Description
- Premium wall saw blade (15-20 kW) for balanced performance in reinforced concrete (60H arbor fits on Hilti wall saws)
- Base material
- Concrete, Reinforced concrete
- Segment type
- Sintered
- Wet or dry operation
- Wet