NEW!Now manage your Hilti tools or book tool's repair onlineKnow more

System connectors and interfaces

Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports

152 Products

Filter
MT-S-RS Rod stiffener
Description
Pre-assembled connector for fastening strut channel around threaded rod to provide seismic bracing
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-S-L 40 OC Seismic angle bracket
Description
Angle bracket for assembling braced MT-40 strut channel structures in seismic zones, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-S-H1 OC Seismic brace base
Description
One-hole hinged connector for assembling seismic bracing of MT strut channel framing, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-GXL S1 OC Light-duty baseplate
Description
Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-L OC Light-duty baseplate
Description
Post base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-FP Threaded strut plate
Description
Fixation plate with threaded hole for attaching media to strut channels
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-FA-G OC Girder fixation angle
Description
Slotted angle plate for attaching media to MT girders, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-FPT Threaded strut plate
Description
Fixation plate with threaded hole for attaching media to strut channels
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-FPT OC Threaded strut plate
Description
Fixation plate with threaded hole for attaching media to strut channels, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-C-GL OC Angle bracket
Description
Braced angle bracket for heavy-duty MT girder structures subject to 3D loads, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-S-RS OC Rod stiffener
Description
Pre-assembled connector for fastening strut channel around threaded rod to provide seismic, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-C-GS A OC Angle bracket
Description
Adjustable, braced angle bracket for girder and strut channel structures subject to 3D loading, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-T OC Light-duty baseplate
Description
Base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-CC-40/50 OC U-Fitting
Description
Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-CC-70 OC U-Fitting
Description
Clamp for cross-connection of one MT girder to another channel/girder, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-CC-60 U-Fitting
Description
Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-CC-60 OC U-Fitting
Description
Clamp with corrosion-resistant coating for channel-to-channel or channel-to-girder cross-connections with MT strut channel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-CC-40D U-Fitting
Description
Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-CC-40D OC U-Fitting
Description
Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-CT-H2 Flat strut fitting
Description
Flat T channel connector for fastening two MT channels together
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-CT-H5 Strut cross plate
Description
Flat cross channel connector for fastening three MT channels together
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-CT-T Strut tee plate
Description
Flat T channel connector for fastening two MT strut channels together
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-CT-H4 Strut splice plate
Description
Flat channel connector used as a longitudinal extender for MT channels
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-CT-H5 OC Strut cross plate
Description
Flat cross channel connector for fastening three MT channels together, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-ES-60 Splice clevis
Description
Splice connector for coupling MT-60 strut channels end-to-end
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-ES-60 OC Splice clevis
Description
Splice connector for coupling MT-60 strut channels end-to-end, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)


Material composition
Aluminium, EPDM rubber, Recycled Rubber blend SBR-PU-EPDM
Surface finish
n/a
Material thickness
2.75 mm


Material composition
Aluminium, EPDM rubber, Recycled Rubber blend SBR-PU-EPDM
Surface finish
n/a
Material thickness
2.75 mm


Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
MT-AB-LS Long span angular bracing
Description
Angle brace for modular support structures with longer spans
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-FTR-LS Long span threaded rod connector
Description
Strut channel connector for bracing modular support structures with longer spans
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MQS-AP Seismic rod hinge
Description
Galvanised threaded rod hinge for seismic bracing of MEP support structures
Material composition
Base plate: S355MC - DIN EN 10149-2, Pin: 11SMn30+C - DIN EN 10277-3, Threaded washer: 11SMn30+C - DIN EN 10277-3, Hexagon screws: Steel grade 8.8, Washer: Galvanised steel
Surface finish
Indoor Coated - Electro galvanised
Material thickness
6 mm
MT-C-GLP T A OC Connector plate
Description
Hot-dip galvanised girder connector for assembling and bracing modular support structures in moderately corrosive environments
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
MT-C-GSP T A OC Connector plate
Description
Hot-dip galvanised girder connector for assembling and bracing modular support structures in moderately corrosive environments
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-CTAB Screw
Description
Grade 8.8 bolt with square washer used for assembling raised floor systems in dry, indoor environments
Material composition
Q355 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-CTR-GS OC Girder hanger
Description
Hanger for suspending MT-70 and MT-80 girders from threaded rod to create heavy-duty MEP and HVAC trapeze
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
MT-CTR-GL OC Girder hanger
Description
Hanger for suspending MT-90 and MT-100 girders from threaded rod to create heavy-duty MEP and HVAC trapeze
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
MT-C-GSP L A OC Connector plate
Description
Hot-dip galvanised girder connector for assembling and bracing modular support structures in moderately corrosive environments
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
MT-B-O2B OC 3D-load baseplate
Description
Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-O4 3D-load baseplate
Description
Base connector for anchoring strut channel structures under 3D loading to concrete and steel or steel
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-B-O4 OC 3D-load baseplate
Description
Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-GS T OC Girder baseplate
Description
Base connector for anchoring MT-70 and MT-80 girder structures to concrete and steel, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-GL O4 OC Heavy-duty baseplate
Description
Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-GXL O4 OC Heavy-duty baseplate
Description
Base connector for anchoring 3D, heavy-duty MT-100 girder structures to concrete, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-GXL S2 OC Light-duty baseplate
Description
Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-GXL S3 OC Light-duty baseplate
Description
Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-S-H2 Seismic brace base
Description
Two-hole hinged connector for assembling seismic bracing of MT strut channel framing
Material composition
Q355 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MT-S-H2 OC Seismic brace base
Description
Two-hole hinged connector for assembling seismic bracing of MT strut channel framing, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
MT-B-GS AB OC Heavy-duty brace
Description
Hot-dip galvanised adjustable heavy-duty bracing and baseplate suitable for girders, concrete and steel
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
10 mm
MQS-CH


Description
Galvanised pre-assembled threaded rod brace connector with increased load capacity for mounting to base material
Material composition
Connector: S275JR - DIN EN 10025, Pin: 11SMnPb37+C
Surface finish
Indoor Coated - Electro galvanised
Material thickness
4 mm
MQN-C


Description
Galvanised channel connector for joining any elements with a butterfly opening
Product class
Ultimate
Material composition
Plate: steel S355J2 DIN EN 10025-2, Nut: S355MC - DIN EN 10149-2, Bolt: grade 8.8 - DIN EN ISO 898
Surface finish
Indoor Coated - Electro galvanised
MQM Wing nut
Description
Galvanised wing nut for connecting modular support system components
Material composition
Wings: plastic PA, Nut: S355MC - DIN EN 10149-2
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MQA-B pipe clamp saddle
Description
Ultimate galvanised pipe clamp saddle – fire-tested according to ETA
Approvals
ETA
Product class
Premium
Material composition
Nut: C4C - DIN EN 10263, Plate: S 235 JRG2 - DIN EN 10025, Plastic: PBT
MQW-Q2 Pre-assembled angle
Description
Galvanised 90-degree pre-assembled angle for connecting multiple MQ strut channels
Wrench size
17 mm
Material composition
Angle: DD11 - DIN EN 10111, Bolt: M10 grade 8.8 - DIN ISO 898
Surface finish
Indoor Coated - Electro galvanised
MQW-4-90 Angle Connector
Description
Galvanized 90-degree angle for connecting multiple MQ strut channels
Material composition
S235JR - DIN EN 10025
Surface finish
Indoor Coated - Electro galvanised
Number of holes
4
MQW-8/90 Angle bracket
Description
Galvanised 90-degree angle for connecting multiple MQ strut channels
Material composition
S235JR - DIN EN 10025
Surface finish
Indoor Coated - Electro galvanised
Number of holes
8
MQV-2/2 D Channel foot
Description
Galvanised channel foot for fastening channels to concrete
Material composition
S235JR - DIN EN 10025
Surface finish
Indoor Coated - Electro galvanised
Material thickness
4 mm
MQS-SP-L


Description
Galvanised preassembled channel connector with FM approval for longitudinal seismic bracing of fire sprinkler pipes
Material composition
Connector: S275JR - DIN EN 10025, Channel plate: S275JR - DIN EN 10025, Base plate: S355MC - DIN EN 10149-2, Bolt: Steel grade 8.8, Nut: Steel grade 8
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MQS-SP-T


Description
Galvanised pre-assembled strut channel connector with FM approval for transversal seismic bracing of fire sprinkler pipes
Material composition
Connector: S275JR - DIN EN 10025, Channel plate: S275JR - DIN EN 10025, Base plate: S355MC - DIN EN 10149-2, Bolt: Steel grade 8.8, Nut: Steel grade 8
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
MQB Clamp (strut to concrete)
Description
Galvanised clamp for cross-connection of one MQ strut channel to concrete
Material composition
S235JR - DIN EN 10025
Surface finish
Indoor Coated - Electro galvanised
Material thickness
4 mm
Showing 61 - 120 of 152 Products