System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports
153 Products
Filter
- Description
- Galvanised beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025, Nut - DIN 50961
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised clamp for cross-connection of one MQ strut channel to another
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
premium
- Description
- Galvanised pipe clamp saddle for connecting threaded components to MQ/HS channels
- Product class
- Premium
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised pre-assembled beam connector with FM approval for seismic bracing of fire sprinkler pipes on steel structures
- Material composition
- Connector: S275JR - DIN EN 10025, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
standard
- Description
- Standard hot-dip galvanised (HDG) angle for many common strut connections
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 6 mm
- Description
- Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition
- Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Stainless steel (A4) channel connector for joining any elements with a butterfly opening
- Tightening torque
- 40 Nm
- Material composition
- Screw: A4-70 - DIN ISO 3506-1, Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel wing nut for connecting modular support system components
- Material composition
- Nut: 1.4581 (A4) - DIN EN 10283, Wings: plastic PA
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) 90-degree angle for connecting multiple MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) channel connector for two-dimensional structures
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition
- Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L, Plastic: PB
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel clamp for fastening one MQ strut channel to another
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) single beam clamp for connecting MT base connectors to steel beams
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Tightening torque
- 206 Nm
- Description
- Galvanised medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised angles to increase stiffness while supporting pipe rings in riser shafts
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Base material type
- Modular Support
- Description
- Premium galvanised 2-hole base plate for light-duty fixed point applications (imperial)
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised beam clamp for fastening threaded rods to steel girders without internal thread
- Base material type
- Steel
- Material composition
- EN-GJMB – EN 1562
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised retaining strap for fastening MAB beam clamps more securely
- Base material type
- Steel
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Stainless steel (A4) medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Galvanised light-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Premium galvanised 4-hole base plate for light-duty fixed point applications (imperial)
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Channel end cap for covering the ends of Hilti MQ strut channels
- Material composition
- Plastic component: polypropylene
- Surface finish
- n/a
- Material thickness
- 4 mm
- Description
- Channel end cap for MT-20 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-30 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-40 and MT-50 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-60 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-70 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-80 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-90 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-100 girders
- Material composition
- PPB-M02
- Surface finish
- n/a