Search Results
112
Products for "drilling machine"
Filter
- Description
- Manual-set drop-in anchor for fastening core drilling machines and wall saws to concrete (carbon steel)
- Environmental conditions
- Dry indoor
- Approvals / test reports
- N/A
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- Lightweight, compact corded drill driver for applications in metal and wood
- Chuck clamping range
- 1 - 10 mm
- No load RPM
- gear 1: 3200 rpm
- Maximum torque (soft/hard joint)
- 12 Nm (soft joint)
New
- Description
- Cordless drill for predrilling accurate holes for X-BT fasteners
- Application
- [consumable dependent]
- RPM
- 4000 rpm
- Max. torque
- 3 Nm
- Description
- Heavy-duty diamond coring machine with high-frequency motor and optional auto-feed unit for rig-based coring from 52-500 mm (2-1/16 - 19-11/16”) in diameter
- Diameter range
- 52 - 500 mm
- Base material
- Concrete, Reinforced concrete
- Operation mode
- Rig-based drilling system
- Description
- Corded two-speed, high-rpm drill driver for metal applications
- Chuck clamping range
- 2 - 13 mm
- No load RPM
- gear 1: 1200 rpm; gear 2: 3300 rpm
- Maximum torque (soft/hard joint)
- 51 Nm (soft joint)
- Description
- Compact, light diamond coring machine for wet, handheld coring of heavy-duty anchor and rebar holes from 8-35 mm (5/16 - 1-3/8") in diameter
- Diameter range
- 8 - 35 mm
- Base material
- Concrete, Masonry
- Operation mode
- Hand-held and rig-mounted drilling system
- Description
- Compact but powerful diamond coring machine for rig-based concrete coring from 25-202 mm (31/32 – 7-15/16") in diameter
- Diameter range
- 25 - 202 mm
- Drill stand
- Base plate dimensions and system weight based on use of SFL stand
- Base material
- Concrete
- Description
- Extremely compact, light and mobile diamond coring machine for rig-based concrete coring from 16-162 mm (5/8 – 6-3/8") in diameter
- Diameter range
- 16 - 162 mm
- Base material
- Concrete
- Operation mode
- Rig-based drilling system
- Description
- Drill bit for precise drilling in natural stone panels
No technical data available
premium
- Description
- HSS step drill bit with 3-flat shank for faster drilling of holes in metal using a drill driver
- Connection end
- Hexagonal
- Base material
- Steel, Cast iron, Non-ferrous metal, Plastic, Plexiglass
- Application
- Drilling in steel and sheet metal
- Description
- Heavy-duty diamond drilling tool for coring medium and large diameters up to 500 mm
- Diameter range
- 35 - 500 mm
- Base material
- Concrete
- Operation mode
- Rig-based drilling system
New
standard
- Description
- Standard HSS roll-forged drill bit for drilling small holes into steel ≤400 N/mm², similar to DIN 338 / 340
- Product class
- Standard
- Connection end
- Smooth shank
- DIN
- DIN 338
Nuron
- Description
- Steel drilling and driving tool for predrilling accurate holes and installing S-BT screw-in studs (Nuron battery platform)
- RPM
- 2000 rpm
- Max. torque
- 85 Nm
- Chuck type
- Keyless chuck
Nuron
- Description
- Cordless drill driver with interchangeable chucks, more torque, higher RPM and adjustable speed
- Maximum torque (soft/hard joint)
- 55 Nm (soft joint), 75 Nm (hard joint)
- No load RPM
- gear 1: 365 rpm; gear 2: 625 rpm; gear 3: 1440 rpm; gear 4: 2460 rpm
- Chuck clamping range
- 2 - 13 mm
Nuron
- Description
- Compact-class hammer drill driver with Active Torque Control for everyday drilling and driving, especially in hard-to-reach places (Nuron battery platform)
- Maximum torque (soft/hard joint)
- 36 Nm (soft joint), 62 Nm (hard joint)
- No load RPM
- gear 1: 610 rpm; gear 2: 2100 rpm
- Chuck clamping range
- 2 - 13 mm
Nuron
- Description
- Power-class hammer drill driver with Active Torque Control and advanced ergonomics for universal drilling and driving on wood, metal and masonry (Nuron battery platform)
- Maximum torque (soft/hard joint)
- 65 Nm (soft joint), 85 Nm (hard joint)
- No load RPM
- gear 1: 490 rpm; gear 2: 2000 rpm
- Chuck clamping range
- 2 - 13 mm
- Description
- Drill stand for Hilti DD 200 coring machines
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- No
- Column extension
- No
- Description
- Ultimate HSS cobalt drill bit for drilling small holes into steel and stainless steel ≤1100 N/mm², compliant with DIN 338/340
- Connection end
- Smooth shank
- DIN
- DIN 338
- Description
- Set of premium HSS precision-ground drill bits for drilling small holes into steel ≤900 N/mm², compliant to DIN 338 / 340
- Connection end
- Smooth shank
- DIN
- DIN 338
- Description
- Drill mean Hilti DD 160 coring machines
- Fixation mode
- Anchor, vacuum integrated in baseplate
- Angular coring
- Yes
- Column extension
- Yes
- Description
- Drill mean Hilti DD 160 coring machines
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- No
- Column extension
- Yes
- Description
- Drill stand for Hilti DD 120 coring machines
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- No
- Column extension
- No
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- Yes
- Column extension
- Yes
- Description
- Simple heavy-duty diamond drilling tool for coring medium and large diameters up to 500 mm
- Diameter range
- 35 - 500 mm
- Base material
- Concrete
- Operation mode
- Rig-based drilling system
- Description
- Stop drill bit (HMU)
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Stepped drill bit for pre-drilling holes for new-generation X-BT fasteners
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 8 mm
- Description
- Stop drill bit for HSC installation (TE-C)
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete, Reinforced concrete
- Description
- Premium SDS Max (TE-Y) hammer drill bit with carbide tip for drilling into concrete
- Connection end
- TE-Y (SDS-max)
- Base material
- Concrete, Masonry, Brick, Sand-lime block
- Working mode
- Hammer drilling
- Description
- Ultimate SDS Plus (TE-C) hammer drill bit for anchor drilling into reinforced concrete (metric)
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Ultimate SDS Max (TE-Y) hammer drill bit for virtually dust-free drilling in concrete
- Connection end
- TE-Y (SDS-max)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- Ultimate SDS Max (TE-Y) hammer drill bit for exceptional drilling performance in reinforced concrete (metric)
- Connection end
- TE-Y (SDS-max)
- Base material
- Reinforced concrete, Concrete, Masonry, Brick, Sand-lime block
- Working mode
- Hammer drilling
- Description
- Ultimate SDS Plus (TE-C) hollow drill bit for virtually dust-free hammer drilling in concrete
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
New
premium
- Description
- Premium SDS Max (TE-Y) hammer drill bit for high drilling performance in reinforced concrete (metric)
- Connection end
- TE-Y (SDS-max)
- Base material
- Reinforced concrete, Concrete, Masonry, Brick, Sand-lime block
- Working mode
- Hammer drilling
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-Y (SDS-max)
- Working mode
- Hammer drilling, Drilling
- Base material
- Concrete
- Description
- Premium SDS Plus (TE-C) hammer drill bit with 2-flute helix for drilling anchor holes into concrete
- Connection end
- TE-C (SDS-plus)
- Base material
- Concrete, Brick, Masonry, Sand-lime block, Natural stone
- Working mode
- Hammer drilling
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for medium-thick metal-to-metal fastenings (up to 6 mm)
- Screw drive/recess type
- Hexagon head
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor
- Description
- Self-drilling screw (A2 stainless steel) with 16 mm washer for medium-thick metal-to-metal fastenings (up to 6 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 16 mm
- Base materials
- Carbon steel, Aluminium
- Description
- Extension for SDS Max (TE-Y) hammer drill bits - 2 components required (TE-FY extension plus TE-Y-AD adapter)
- Type
- Extension
- Connection end
- TE-Y (SDS-max)
- Working mode
- Hammer drilling
- Description
- Self-drilling screw (A4 stainless steel) without washer for aluminium façade fastenings (up to 3 mm)
- Screw drive/recess type
- PH #2
- Base materials
- Carbon steel, Aluminium
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Coastal areas
- Description
- self-drilling screw (A4 stainless steel) without washer for aluminium façade fastenings (up to 4 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 13 mm
- Base materials
- Aluminium
- Description
- Self-drilling screw (A4 stainless steel) without washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Carbon steel, Aluminium
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Coastal areas
- Description
- Self-drilling screw (A2 stainless steel) without washer for medium-thick metal-to-metal fastenings (up to 6 mm)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Carbon steel, Aluminium
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution
- Description
- Self-drilling screw (A4 stainless steel) with 16 mm washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 16 mm
- Base materials
- Carbon steel, Aluminium
- Description
- Self-drilling screw (zinc-plated carbon steel) with 16 mm washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 16 mm
- Base materials
- Carbon steel
- Description
- Self-drilling screw (A2 stainless steel) with 16 mm washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 16 mm
- Base materials
- Carbon steel, Aluminium
- Description
- Self-drilling screw (A4 stainless steel) with 16 mm washer for medium-thick metal-to-metal fastenings (up to 6 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 16 mm
- Base materials
- Aluminium
- Description
- Self-drilling screw (zinc-plated carbon steel) with 16 mm washer for medium-thick metal-to-metal fastenings (up to 6 mm)
- Screw drive/recess type
- Hexagon head
- Washer size
- 16 mm
- Base materials
- Carbon steel
- Description
- Stainless steel (A4) self-drilling screw without washer for profile-to-profile facade fastenings
- Base materials
- Aluminium
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Coastal areas
- Screw diameter d
- 5.5 mm
- Description
- Drill stands for the Hilti DD 30-W coring motor
- Fixation mode
- Vacuum
- Column extension
- No
- For use with
- DD 30-W
- Description
- Self-drilling screw (A2 stainless steel) with washer for chipless fastening of thin metal sheets (up to 2x 1.0 mm)
- Screw drive/recess type
- TX 25
- Washer size
- 12 mm
- Base materials
- Carbon steel, Aluminium
- Description
- Self-service repair parts for the UD 4 corded drill driver
No technical data available
- Description
- Stepped drill bits for predrilling accurate holes or removing coatings for S-BT threaded screw-in studs on aluminum and steel
- Base materials
- Steel
- Description
- Stepped drill bits for predrilling accurate holes or removing coatings for S-BT threaded screw-in studs on aluminum and steel
- Base materials
- Aluminium
- Description
- Self-drilling wafer head screw (zinc-plated carbon steel) without washer for metal to metal fastening
- Screw drive/recess type
- PH #2, PH #3
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor
- Description
- PFP removal drill bits for predrilling accurate holes and removing coatings from PFP coated steels
- Base materials
- Steel
- Hole diameter
- 31 mm
- Length
- 74 mm
- Description
- PFP removal drill bits for predrilling accurate holes and removing coatings from PFP coated steels
- Base materials
- Steel
- Hole diameter
- 31 mm
- Length
- 74 mm
- Description
- Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer – for hammer drilling and rotary-only drilling
- Weight according to EPTA-Procedure 01/2003 without battery
- 2.7 kg
- Optimum hammer drilling range
- 4 - 12 mm
- Single impact energy
- 1.8 J
- Description
- Interior metal framing screw with wafer head (zinc-plated) for fastening stud to track
- Screw head type
- Wafer head
- Screw drive/recess type
- PH #2
- Collated
- No